GT 500 Direct Feed

Digital Humidity Control for GT500 & SS-700 Systems
Environmental controller with humidity sensor and water solenoid for direct feed applications.

Fast-acting digital control maintains consistent humidity levels with adjustable setpoint and differential. Displays real-time RH and automatically controls fogging output based on conditions.

Programming Difficulty: Level 4 (Moderate–Easy)

• Controls GT500 and SS-700 units (1200W, 10A @ 115V)
• Humidity range: 5–99% RH
• Fast-response digital sensor
• Includes water solenoid for direct feed
• Over-humidity and sensor fault alarms

Not recommended for prolonged operation above 90% RH.

Mechanical Humidity Control – Simple, Reliable Operation
Pre-wired environmental controller with humidity sensor and water solenoid for direct feed systems.

Designed for straightforward operation, this mechanical humidistat automatically activates the unit when humidity drops below the setpoint, maintaining consistent conditions without the need for programming.

Programming Difficulty: Level 1 (No Programming Required)

• Controls GT500 and SS-700 units (1400W, 12A @ 115V)
• Humidity range: 20–80% RH
• Includes water solenoid for direct feed
• Simple dial adjustment with mechanical sensor
• Piggyback plug for quick device connection

Cycle Timer Control for High-Humidity Applications
Designed for applications where humidity levels above 80% RH are desired and repeated short run cycles are needed.

This pre-wired time-cycle control allows the operator to set repeating on/off intervals from 1 second to 24 minutes, providing flexible output control for demanding conditions.

Programming Difficulty: Level 5 (Moderate)

• Adjustable cycle range: 1 second to 24 minutes
• Water-tight NEMA 4X enclosure
• Includes water solenoid for direct feed
• Includes dual outlet adapter

Temperature-Based Control for Evaporative Cooling
Pre-wired environmental controller designed for applications where cooling is the primary objective rather than humidity control.

This control automatically activates the unit when temperatures rise above the setpoint, maintaining consistent cooling conditions with simple, no-programming operation.

Programming Difficulty: Level 4 (Moderate–Easy)

• Controls GT500 and SS-700 direct feed units
• Water-tight NEMA 4X enclosure
• Includes water solenoid for direct feed
• Temperature control range: 40–110°F
• Differential: 2°F
• Piggyback plug for quick device connection

If overhead mounting is not practical, the Economy Traveling Floor Stand provides a durable and mobile support solution for Turbo XE fogging systems. Designed for flexibility in industrial and greenhouse environments, the stand allows for both stationary positioning and oscillating operation.

Constructed from heavy-wall steel pipe with a reinforced base, the unit offers stability during operation while remaining easy to reposition as needed.

• Fully adjustable boom for precise height and angle positioning
• 10” molded wheels for smooth transport across facility floors

The Wall Mount Support provides a stable, space-saving mounting solution for Turbo XE fogging systems in industrial and greenhouse environments. Designed for permanent installation, the mount allows secure positioning while maintaining full operational flexibility.

The 30" vertical support offers adjustable height, while the 21" horizontal extension accommodates full 360° oscillation without obstruction.

• Adjustable mounting height for precise positioning
• 21" cross-support allows unrestricted 360° sweep rotation
• Supplied with lag bolts and masonry anchors for secure installation

The Ceiling Mount Support provides a simple, fixed mounting solution for Turbo XE fogging systems where overhead installation is preferred. Ideal for maximizing floor space, the mount allows consistent positioning in industrial and greenhouse environments.

The 36" horizontal support provides adequate clearance for proper fog dispersion and unobstructed operation.

• 36" horizontal support for overhead mounting
• Ideal for fixed installations with minimal footprint
• Supplied with lag bolts for secure attachment

Ideal for monitoring environments up to 95% Relative Humidity

The Handheld Thermo-Hygrometer provides accurate, real-time measurement of ambient temperature and relative humidity, making it a valuable tool for monitoring greenhouse and industrial environments where fogging systems are in use.

With fast response time and reliable performance in high-humidity conditions, this unit helps operators verify system output, track environmental changes, and maintain optimal conditions for plant health and process control.

Dual readout LCD displays temperature and humidity simultaneously in °F or °C.

• Temperature range/accuracy: 32 to 122°F (0 to 50°C) / ±1.8°F (1°C)
• Humidity range/accuracy: 20 to 95% RH / ±3%
• Response time: approximately 60 seconds
• Power source: CR2032 lithium battery (included)

Ideal for applications up to 100% Relative Humidity

This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient and dew point temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays in °F or °C.

• Temperature range/accuracy: -4 to 122°F (-20 to 50°C)/1.8°F (1°C)
• Humidity range/accuracy: 0 to 100%RH /3%
• Response time: 60 seconds
• Power source: Two "AAA" batteries (included)

24-Hour Timer Control for Scheduled Operation
Ideal for automating consistent on/off cycles in applications where timed operation is preferred.

This reliable mechanical timer controls both power and water flow at selected intervals, making it well suited for dawn-to-dusk or scheduled runtime applications.

Programming Difficulty: Level 2 (Easy)

• Controls GT500 and SS-700 direct feed units
• Mechanical 24-hour timer with on/off trippers
• Minimum 30-minute intervals
• Includes water solenoid for direct feed
• Rain-tight enclosure, 15A receptacle (115V)

Automatic Water Shutoff for Direct Feed Systems
Electrically controls water flow to the unit, ensuring safe and reliable operation.

This solenoid valve automatically opens and closes with the unit’s power supply, allowing water flow only during operation. It is required for direct-feed systems to prevent unwanted water flow when the unit is off or power is interrupted.

• Automatically shuts off water during power loss or system shutdown
• Compatible with manual operation or preexisting control systems
• NEMA 4 watertight components for industrial environments
• Includes mounting bracket and 6' power cord with plug (115V)
• 1/4" OD tubing connection

Increase Coverage & Circulation

Ideal for interior applications and permanent hanging installations, the XE 360 Oscillator increases fog coverage and air circulation through smooth, continuous sweeping motion. The oscillating action helps reduce droplet collisions and fallout while producing more uniform coverage patterns up to 70 feet in diameter. This allows the operator to run higher fog output levels than a stationary unit under equal conditions, resulting in less fallout and improved dryness beneath the fog pattern.

Recommended for indoor use only. While the oscillator assembly is built with a durable stainless steel enclosure and performs well in harsh interior environments, it should not be used in outdoor windy conditions. Wind gusts can place repeated stress on the oscillating housing and gear system, potentially causing premature wear or damage to the mounting assembly. For outdoor applications, a stationary-mounted unit is strongly recommended.

• 304 Stainless Steel Enclosure
• Dwell-free Sweeps from 15º to 360º
• Full 360º Rotation in 3 Minutes
• On/Off Toggle Switch
• Durable 75 Pound Weight Capacity