Direct Feed

SST Flowmeter Panel

SS 700-DF units include a stainless-steel visual flowmeter panel.

The flowmeter panel connects to a pressurized water supply and allows the operator to monitor and adjust the water feed rate going to the SS 700-DF atomizer. A precision needle valve regulates the flow, while the clear polycarbonate meter provides easy visual confirmation of system operation.

Direct-feed SS 700-DF units should always include a water solenoid shutoff valve. This ensures water flow stops automatically whenever power to the unit is interrupted or cycled off. All Jaybird control packages already include an integrated solenoid. If operating manually or using a preexisting control system, a separate Water Solenoid - DF should be installed in the supply line.

The SS 700-DF uses a 1 to 5 GPH flowmeter, matched to the operating range of the unit for reliable low-flow performance and fine fog production. Requires a pressurized water supply (10-100 PSI).

• 1 to 5 GPH flowmeter scale
• Up to 3.5 GPH net fogging output
• Up to 1.5 GPH drain discharge
• Precision needle valve flow control
• In-line strainer included

The 1 to 5 GPH panel is sized to keep the SS 700-DF operating in an effective control range for dependable fine-fog performance.

Water Control Note: SS 700-DF units operated manually or connected to preexisting control systems should always include a water solenoid (or equivalent shutoff valve) to automatically stop water flow whenever power to the unit is interrupted or cycled off. See Water Solenoid - DF by selecting the Control Packages tab above.

How Jaybird Atomizes Water Without Nozzles

Jaybird fog systems use a patented centrifugal atomizing blade developed in 1986. Water enters a reservoir behind the fan blade and is forced through internal channels inside each blade. As the blade spins, centrifugal force drives water toward the blade tips where it exits through precision openings.

See comparisons of Jaybird atomizers in action (1:17 video)

[XE] Atomizer

[GT] Atomizer

[SS] Atomizer

Jaybird Atomizer Platform Comparison

Jaybird’s Centrifugal Atomizers are powered by industrial grade wash-down-duty motors. Designed for wet applications (IP 55). Systems are Indoor/Outdoor and capable for continuous-duty

• 
  Digital Humidistat Control - DF

  Digital Humidity Control for GT500 & SS-700 Systems
  Environmental controller with humidity sensor and water solenoid for direct feed applications.

  Fast-acting digital control maintains consistent humidity levels with adjustable setpoint and differential. Displays real-time RH and automatically controls fogging output based on conditions.

  Programming Difficulty: Level 4 (Moderate–Easy)

  • Controls GT500 and SS-700 units (1200W, 10A @ 115V)
  • Humidity range: 5–99% RH
  • Fast-response digital sensor
  • Includes water solenoid for direct feed
  • Over-humidity and sensor fault alarms

  Not recommended for prolonged operation above 90% RH.

  DH-36-DF $180.00

  Add to Cart
• 
  Jaybird Humidistat - DF

  Mechanical Humidity Control – Simple, Reliable Operation
  Pre-wired environmental controller with humidity sensor and water solenoid for direct feed systems.

  Designed for straightforward operation, this mechanical humidistat automatically activates the unit when humidity drops below the setpoint, maintaining consistent conditions without the need for programming.

  Programming Difficulty: Level 1 (No Programming Required)

  • Controls GT500 and SS-700 units (1400W, 12A @ 115V)
  • Humidity range: 20–80% RH
  • Includes water solenoid for direct feed
  • Simple dial adjustment with mechanical sensor
  • Piggyback plug for quick device connection

  XE-36-DF $174.00

  Add to Cart
• 
  Cycle Timer Control - DF

  Cycle Timer Control for High-Humidity Applications
  Designed for applications where humidity levels above 80% RH are desired and repeated short run cycles are needed.

  This pre-wired time-cycle control allows the operator to set repeating on/off intervals from 1 second to 24 minutes, providing flexible output control for demanding conditions.

  Programming Difficulty: Level 5 (Moderate)

  • Adjustable cycle range: 1 second to 24 minutes
  • Water-tight NEMA 4X enclosure
  • Includes water solenoid for direct feed
  • Includes dual outlet adapter

  CTA-120-DF $195.00

  Add to Cart
• 
  Thermostat Control - DF

  Temperature-Based Control for Evaporative Cooling
  Pre-wired environmental controller designed for applications where cooling is the primary objective rather than humidity control.

  This control automatically activates the unit when temperatures rise above the setpoint, maintaining consistent cooling conditions with simple, no-programming operation.

  Programming Difficulty: Level 4 (Moderate–Easy)

  • Controls GT500 and SS-700 direct feed units
  • Water-tight NEMA 4X enclosure
  • Includes water solenoid for direct feed
  • Temperature control range: 40–110°F
  • Differential: 2°F
  • Piggyback plug for quick device connection

  THA-120-DF $195.00

  Add to Cart
• 
  Economy Traveling Floor Stand

  If overhead mounting is not practical, the Economy Traveling Floor Stand provides a durable and mobile support solution for Turbo XE fogging systems. Designed for flexibility in industrial and greenhouse environments, the stand allows for both stationary positioning and oscillating operation.

  Constructed from heavy-wall steel pipe with a reinforced base, the unit offers stability during operation while remaining easy to reposition as needed.

  • Fully adjustable boom for precise height and angle positioning
  • 10” molded wheels for smooth transport across facility floors

  XE-100 $195.00

  Add to Cart
• 
  Wall Mount

  The Wall Mount Support provides a stable, space-saving mounting solution for Turbo XE fogging systems in industrial and greenhouse environments. Designed for permanent installation, the mount allows secure positioning while maintaining full operational flexibility.

  The 30" vertical support offers adjustable height, while the 21" horizontal extension accommodates full 360° oscillation without obstruction.

  • Adjustable mounting height for precise positioning
  • 21" cross-support allows unrestricted 360° sweep rotation
  • Supplied with lag bolts and masonry anchors for secure installation

  XE-W $117.00

  Add to Cart
• 
  Ceiling Mount

  The Ceiling Mount Support provides a simple, fixed mounting solution for Turbo XE fogging systems where overhead installation is preferred. Ideal for maximizing floor space, the mount allows consistent positioning in industrial and greenhouse environments.

  The 36" horizontal support provides adequate clearance for proper fog dispersion and unobstructed operation.

  • 36" horizontal support for overhead mounting
  • Ideal for fixed installations with minimal footprint
  • Supplied with lag bolts for secure attachment

  XE-C $73.00

  Add to Cart
• 
  Temperature-Humidity Meter

  Ideal for monitoring environments up to 95% Relative Humidity

  The Handheld Thermo-Hygrometer provides accurate, real-time measurement of ambient temperature and relative humidity, making it a valuable tool for monitoring greenhouse and industrial environments where fogging systems are in use.

  With fast response time and reliable performance in high-humidity conditions, this unit helps operators verify system output, track environmental changes, and maintain optimal conditions for plant health and process control.

  Dual readout LCD displays temperature and humidity simultaneously in °F or °C.

  • Temperature range/accuracy: 32 to 122°F (0 to 50°C) / ±1.8°F (1°C)
  • Humidity range/accuracy: 20 to 95% RH / ±3%
  • Response time: approximately 60 seconds
  • Power source: CR2032 lithium battery (included)

  CP-205 $87.00

  Add to Cart
• 
  Temperature-Humidity Meter w/ Dew Point

  Ideal for applications up to 100% Relative Humidity

  This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient and dew point temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays in °F or °C.

  • Temperature range/accuracy: -4 to 122°F (-20 to 50°C)/1.8°F (1°C)
  • Humidity range/accuracy: 0 to 100%RH /3%
  • Response time: 60 seconds
  • Power source: Two "AAA" batteries (included)

  CP-301 $169.00

  Add to Cart
• 
  24 Hour Timer Control - DF

  24-Hour Timer Control for Scheduled Operation
  Ideal for automating consistent on/off cycles in applications where timed operation is preferred.

  This reliable mechanical timer controls both power and water flow at selected intervals, making it well suited for dawn-to-dusk or scheduled runtime applications.

  Programming Difficulty: Level 2 (Easy)

  • Controls GT500 and SS-700 direct feed units
  • Mechanical 24-hour timer with on/off trippers
  • Minimum 30-minute intervals
  • Includes water solenoid for direct feed
  • Rain-tight enclosure, 15A receptacle (115V)

  TC-120-DF $157.00

  Add to Cart
• 
  Water Solenoid - DF

  Automatic Water Shutoff for Direct Feed Systems
  Electrically controls water flow to the unit, ensuring safe and reliable operation.

  This solenoid valve automatically opens and closes with the unit’s power supply, allowing water flow only during operation. It is required for direct-feed systems to prevent unwanted water flow when the unit is off or power is interrupted.

  • Automatically shuts off water during power loss or system shutdown
  • Compatible with manual operation or preexisting control systems
  • NEMA 4 watertight components for industrial environments
  • Includes mounting bracket and 6' power cord with plug (115V)
  • 1/4" OD tubing connection

  SV-120-DF $98.00

  Add to Cart