ORSM

 

XE Chemical Fogger

XE ORSM 2000

(ORSM) come standard equipped with *smart control, dual flow valves, 4 position (XE) atomizer, hose connect w/float valve, a rugged 18-gallon wheeled supply tank plus more. An optional all-stainless-plumbing model (SST) is available for use with highly corrosive chemicals.

(XE) is our most powerful atomizer. Designed to endure harsh environments in a variety of commercial & industrial applications. They connect to ordinary water supplies requiring no high-pressure pumps or nozzles.

XE ORSMs have enormous fogging capability, producing tiny particles that evaporate quickly. ORSM gets regulated by 2 inner-connected quarter-turn ball valves providing greater control at low-flow rates. Units can be operated continuously or automated using a secondary controller.

Indoor/Outdoor applications include: Odor Control, Chemical Fogging, ULV Fumigation, Oxidizers and Sterilization. 

Stainless-steel fabrication and UV stabilized polymers allow for greenhouse and harsh-environment use. ORSM has 18’ power cord.

  • Net Fogging Output Up to 8 GPH
  • Smart Control | Auto Shut-Off
  • Dual Flow Valves
  • Pivoting Fogging Head
  • Up to 12,000 | 26,000 sq. ft. /w HAF
  • Starting at $2,579.00

*Smart Control

ORSMs Power Control Box Provides 2 Operational Modes:

ON - for manual or automated operation when used with a secondary controller.

AUTO SHUT-OFF mode - automatically turns the unit off when tank becomes low.

  • Luminated Water-Tight Switches
  • Fan Override
  • Internal Feed Pump
  • Hose Connect w/ Float Control Valve
  • Inline Strainer

Jaybird’s Unique Blade Design

Our exclusive blade design enhances reliability and performance.

ABB Wash-Down-Duty Motor

  • Industrial Grade (IP 55)
  • For Use Around Water Spray

SST Plumbing Option

The SST version comes with all-stainless-steel plumbing components. Required when fogging highly corrosive chemicals.

  • Replaces Standard Brass Fittings
  • 304 (18-8) Grade Stainless Steel
  • Complete System

Metering Pump Inlet

ORSMs has a port available for connection to a metering pump. This allows for concentrate to be feed into the flow in route to the fogging head.

  • 1/4" NPT Port 
  • 3/8" OD Tube Fitting (provided)

Unit Dimensions:

Width 21 in / 53 cm

Length 25.5 in / 65 cm

Height 44 in / 112 cm
Approximate Unit Weight: 80 lbs / 36.3 kg
Shipping Weight:

129 lbs / 58.5 kg
Shipping Dimensions:

46”x 24”x 32” (LxWxH)
Fogging Head Pivot Angle: 0°, 15°, 30°, 45°
Motor/ Electrical:

1/2 hp - 7.8 amps @ 115V - 60Hz

1/3 hp - 4.4 amps @ 240V - 50Hz
Noise @ 10 ft:

72 dB(A) - 60Hz

70 dB(A) - 50Hz
Average Particle Size:

5-10 microns @ low output

10-20 microns @ high output
Feed Range:

up to 11 GPH - 60Hz

up to 31 LPH - 50Hz
Net Fogging Output:

2.4 - 7.9 GPH - 60Hz

9.7 - 25.4 LPH - 50Hz
Tank Capacity: 18 US gal / 68 L
CFM:

3,000 - 60Hz

2,800 - 50Hz
Cooling Capability:

64,000 Btu/h @ - 60Hz

51,000 Btu/h @ - 50Hz
304 Stainless Steel:

All hardware, sheet steel and wire goods
Environment:

Endures temperatures from
33° to 160° F

Indoors / outdoors

Humidity to 100% RH

UV stabilized & impact resistant
Country of Origin:

USA
  • Digital Humidistat Control

    Environmental Controller w/ Humidity Sensor

    A precision controller suitable for many applications. Control is very fast
    acting, displays humidity levels and has programmable differential range.
    - Not recommended in prolonged use above 90% RH.

    • Fast-acting Digital Sensor
    • Range 5-99% RH
    • Rated up to 1800W (15A @ 115V)
    • Over-Humidity and Sensor Fault Alarm

    DH-120 $132.00
  • Humidistat Control

    Dependable, Easy to Use


    Ideal for control in applications under 80% RH. Controller incorporates a
    mechanical-action humidistat sensor along with a starter contactor. For
    reliable start of high inrush loads of the devices being automated.


    • Range 20-80% RH
    • Differential approximately 7%
    • Rain-tight Enclosure
    • 30A Contactor DPST

    H-120 $184.00
  • 24-Hour Timer Control

    Excellent for controlling long operation cycles

    If your primary interest is long cycle operation, the basic 24-hour timer control is a reliable way to automate the XE mobile units.

    • Supplied with male and female cord set.
    • Rain-tight Nema 3 enclosure
    • Adjustable 15 minute cycles
    • 115V 60Hz
    TC-180 $164.00
  • Thermostat Control

    If your main interest is evaporative cooling

    If your interest is in evaporative cooling, the thermostat control is the best choice to automate your XE mobile units.

    • Water-tight Nema 4X
    • Differential 3º F
    • Control range 40-110º F
    • 100- 250V 50/60Hz
    TH-180 $154.00
  • Temperature-Humidity Meter

    Ideal for applications below 95% Relative Humidity

    This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays
    in °F or °C.

    • Temperature range/accuracy: 32 to 122°F (0 to 50°C)/1.8°F (1°C)
    • Humidity range/accuracy: 20 to 95%RH /3%
    • Response time: 60 seconds
    • Power source: CR2032 Lithium-ion battery (included)
    CP-205 $87.00
  • Temperature-Humidity Meter w/ Dew Point

    Ideal for applications up to 100% Relative Humidity

    This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient and dew point temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays in °F or °C.

    • Temperature range/accuracy: -4 to 122°F (-20 to 50°C)/1.8°F (1°C)
    • Humidity range/accuracy: 0 to 100%RH /3%
    • Response time: 60 seconds
    • Power source: Two "AAA" batteries (included)
    CP-301 $169.00
Item added to Cart
0 items in cart
Subtotal:   $ 0.00