HRSM
Turbo Fogger (mobile)
Aquafog XE HRSM 2000
HRSMs have a sturdy, mobile 18-gallon supply tank that recycles its waste water. An optional (SST) version is available that has stainless plumbing for use with highly corrosive chemicals.
(XE) is our most powerful atomizer! Designed to endure harsh environments in a variety of commercial & industrial applications. They connect to ordinary water supplies requiring no high-pressure pumps or nozzles.
XE HRSMs have enormous fogging capability, producing tiny particles that evaporate quickly. HRSM gets regulated by a quarter-turn ball valve and can be operated continuously or automated using a secondary controller.
Indoor/Outdoor applications include: Humidification, Evaporative Cooling and Chemical Fogging.
Stainless-steel fabrication and UV stabilized polymers allow for harsh-environment use. HRSM comes with 18’ power.
- Net Fogging Output Up to 13.5 GPH
- Pivoting Fogging Head
- 109,350 Btu/h (Evap. Cooling)
- 18 Gallon Tank w/ Float Valve Control
- Starting at $2,299.00
- Click to ViewFeatures
- Click to ViewSpecifications
- Click to ViewControl Packages & Accessories
Features & Controls
HRSMs have an internal feed pump, a flow control valve, On/Off power switch and an internal float control valve.
|
|
A 1/4 turn ball valve controls the fogging output. Lower flow rates are generally used in applications requiring drier fog.
Flow Control Rate per Application:
| Full Open | Mid Open | Slightly Open |
|---|---|---|
|
Evap. Cooling AG/Horticulture Concrete Curing Mushroom Growing |
Mfg. Humidification Horticulture Wine/Barrel Storage Wood/Lumber/Paper |
Chemical Fumigation Textile Humidification Dust/Static Control |
Jaybird’s Unique Blade Design
Our exclusive blade design enhances reliability and performance.
ABB Wash-Down-Duty Motor
- Industrial Grade (IP 55)
- For Use Around Water Spray
SST Plumbing Option
The SST version comes with all-stainless-steel plumbing components. Required when fogging highly corrosive chemicals.
- Replaces Standard Brass Fittings
- 304 (18-8) Grade Stainless Steel
- Complete System
| Dimensions: |
Width 21 in / 53 cm Length 25.5 in / 65 cm Height 44 in / 112 cm |
| Approximate Weight: | 80 lbs / 36.3 kg |
| Approximate Shipping Weight: | 129 lbs / 58.5 kg |
| Propulsion Distance: | 30 - 35 ft / 9.1 - 10.5 m |
| Fogging Head Pivot Angle: | 0°, 15°, 30°, 45° |
| Noise @ 10 ft distance: |
72 dB(A) - 60Hz 70 dB(A) - 50Hz |
| Net Fogging Output: |
up to 13.5 GPH - 60Hz up to 41 LPH - 50Hz |
| Average Particle Size: |
5-10 microns @ low output 25 microns @ mid output 35 microns @ high output |
| Tank Capacity: | 18 US gal / 68 L |
| Main Motor: |
1/2 HP - 7.8 amps @ 115V - 60Hz 1/3 HP - 4.4 amps @ 240V - 50Hz |
| CFM: |
3,000 - 60Hz 2,800 - 50Hz |
| Cooling Capability: |
109,000 Btu/h @ - 60Hz 87,500 Btu/h @ - 50Hz |
| Hardware: | 300 Series stainless steel |
| Environment: |
Endures temperatures from Indoors / outdoors Humidity to 100% RH UV stabilized & impact resistant |
| Country of Origin: |
USA |
-
Digital Humidistat ControlEnvironmental Controller w/ Humidity Sensor
A precision controller suitable for many applications. Control is very fast
acting, displays humidity levels and has programmable differential range.
- Not recommended in prolonged use above 90% RH.• Fast-acting Digital Sensor
• Range 5-99% RH
• Rated up to 1800W (15A @ 115V)
• Over-Humidity and Sensor Fault Alarm -
Humidistat ControlDependable, Easy to Use
Ideal for control in applications under 80% RH. Controller incorporates a
mechanical-action humidistat sensor along with a starter contactor. For
reliable start of high inrush loads of the devices being automated.
• Range 20-80% RH
• Differential approximately 7%
• Rain-tight Enclosure
• 30A Contactor DPST -
24-Hour Timer ControlExcellent for controlling long operation cycles
If your primary interest is long cycle operation, the basic 24-hour timer control is a reliable way to automate the XE mobile units.
- Supplied with male and female cord set.
- Rain-tight Nema 3 enclosure
- Adjustable 15 minute cycles
- 115V 60Hz
-
Thermostat ControlIf your main interest is evaporative cooling
If your interest is in evaporative cooling, the thermostat control is the best choice to automate your XE mobile units.
- Water-tight Nema 4X
- Differential 3º F
- Control range 40-110º F
- 100- 250V 50/60Hz
-
Temperature-Humidity MeterIdeal for applications below 95% Relative Humidity
This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays
in °F or °C.- Temperature range/accuracy: 32 to 122°F (0 to 50°C)/1.8°F (1°C)
- Humidity range/accuracy: 20 to 95%RH /3%
- Response time: 60 seconds
- Power source: CR2032 Lithium-ion battery (included)
-
Temperature-Humidity Meter w/ Dew PointIdeal for applications up to 100% Relative Humidity
This precision hand-held thermo/hygrometer is ideal for measuring and monitoring ambient and dew point temperatures and relative humidity in a wide range of professional and industrial applications. Dual readout LCD displays in °F or °C.
- Temperature range/accuracy: -4 to 122°F (-20 to 50°C)/1.8°F (1°C)
- Humidity range/accuracy: 0 to 100%RH /3%
- Response time: 60 seconds
- Power source: Two "AAA" batteries (included)
-
.png)
CoolAire™ Smart ControllerFeatures two operational modes:
[ON] - for manual or automated operation (when combined with additional control).
[SHUT-OFF mode] - will automatically turn off the unit when tank becomes nearly empty.
Add this smart control feature to your HRSM. A momentary push button switch operates the power supply through an electrical relay that is controlled by an internal fluid-level switch. In “Auto Shut-Off mode”, if the unit shuts down, the tank will require re-filling before resuming operation.
- Allow extra 2-4 days lead time
- Includes a Fan Override Toggle Switch
Item added to Cart
